Just start to put the stainless steel handle on the new door lock plate device, pass this hole next to the door, the bolt curve of the anti-theft door is composed of the device, which must guide the outside of the door. The latch is used to quickly stabilize the catcher included with the stainless steel handle kit for the panel door.
Then there is the outer door handle that sticks in from the outside of the door we entered. Typically two sleeves, a cylinder with a latch hole inside, would work well. Press firmly on the door handle until the cover rests against the door. So we reached into the inner door handle of the door from the inside of the door. Two stabilizing screws, place the holes on the cover plate, and turn the screw threads in an orderly clockwise direction to the outer door to pull the glove, and tighten the screws firmly, using a Phillips screwdriver. Finally, on the door frame on the side of the door frame along the curved curve around the inside of the door frame, the impact plate and the screws that come with the kit are firmly stabilized.
The above is the installation of the complete stainless steel handle, each step is closely linked, do not take the wrong step carelessly.https://www.chinadoorviewer.com/
Post time: Feb-18-2022